 |
 |
POWDERS & ANTISEIZE COMPOUNDS |
|
Product |
Description / Characteristics |
Typical Applications |
| |
MOLYGRAF-Z |
Molybdenum disulphide Dry Lubricant Powder
| • |
Pure form of Molybdenum disulphide powder. |
| • |
Lamellar structure. |
| • |
Lowest co-efficient of friction. |
| • |
Resists water, solvents, acids and alkalies. |
|
| • |
As dry lubricant on locks, hinges or other moving parts where liquids cannot be used. |
| • |
Burnishing, polishing or tumbling in powder form or by dusting. |
| • |
As additive in all plastics for excellent lubricity and to minimize wear and tear of plastic parts. |
| • |
For cold forging of precision parts and fasteners. |
| • |
As a dry lubricant in cryogenic applications. |
| |
|
| Temperature range: - |
| -175º C to +450º C in presence of air and Upto +1100º C in absence of air. |
|
 |
Product |
Description / Characteristics |
Typical Application |
| |
MOLYGRAF-GP |
Molybdenum disulphide/ Mineral Oil Base Antiseize Lubricant
| • |
Antiseize thread lubricant based on highly refined mineral oil, Molybdenum disulphide, anti-oxidants, corrosion inhibitors and E.P. agents. |
| • |
An excellent lubricant for heavy loads and slow speeds. |
| • |
Lowest co-efficient of friction. |
| • |
Prevents initial running in all machined surfaces applications requiring sliding. |
|
| • |
In sliding bridge pads, turbines, rock crushers, heavy-duty roller bearings, for start and stop operations. |
| • |
As anti-seize lubricant in dusty and abrasive conditions over wide temperature range as in ovens, Press fittings, for nut/bolt and studs to prevent gelling, seizing, cold welding and fretting corrosion in power plants, fertilizers, cement, petrochemicals, heavy water plants, sugar etc in boiler, turbine, steam lines, valve spindles etc. |
| • |
Screw-down assemblies, press fit and threaded connections and gear type assemblies. |
| |
|
| Temperature range: - |
| - 10º C to +475º C in presence of air. Upto +1100º C in absence of air. |
|
|
Product |
Description / Characteristics |
Typical Application |
| |
MOLYGRAF-GN |
Molybdenum disulphide / Semi-synthetic Oil base Antiseize Lubricant
| • |
Semi-synthetic oil base antiseize thread lubricant fortified with Molybdenum disulfide and other solid lubricants. |
| • |
It withstands extreme pressure and does not squeeze out due to its affinity to metals. |
| • |
Does not form gummy resinous mass due to synthetic base oil. |
| • |
Free from metal powders and copper. |
|
| • |
Slow speed bearings, splines, cams and ways during initial running-in period and minimize pressure needed for press-fit operations, especially on negative clearances. In metalworking operation like pressing, extrusion, drawing, impact extrusion etc. |
| |
|
| Temperature range: - |
| - 20º C to + 475º C in presence of air and Upto + 1100º C in absence of air |
|
|
Product |
Description / Characteristics |
Typical Application |
| |
MOLYGRAF-M7P |
Molybdenum disulphide/ Silicone Oil Base Anti-seize Lubricant
| • |
Silicone oil base anti-seize thread lubricant with Molybdenum disulphide and other solid lubricant. |
| • |
Free from metal powders and copper. |
| • |
Does not support fire or explode. |
|
| • |
For wide temperature range in plastic, rubber seals, couplings, “O” rings etc.
Anti-seize compound for oxygen system, as it is carbon free, does not support fire or explode on contact with oxygen.
As mold release agent on chill and shell mold castings. |
| |
|
| Temperature range: - |
| - 50º C to + 450º C and Upto +1100º C in absence of air. |
|
|
Product |
Description / Characteristics |
Typical Application |
| |
MOLYGRAF-UP |
Molybdenum disulphide / Glycol Base Antiseize Lubricant
| • |
Glycol base anti-seize compound with Molybdenum disulfide and other solid lubricant. |
| • |
The carrier evaporates at high temperature leaving a film of Molybdenum disulfide. |
| • |
Ideal where petroleum oil is not tolerable or where only Molybdenum disulfide is required at high temperatures. |
|
| • |
For bearings and sliding component in very high temperature above 200º C, ladles and converters handling molten metals, steel plants, power plants etc. |
| |
|
| Temperature range: - |
| - 50º C to +450º C and Upto +1100º C in absence of air. |
|
|
Product |
Description / Characteristics |
Typical Application |
| |
THREADKOTE-C-55 |
Copper Anticorrosive Antiseize Lubricant
| • |
Balanced blend of fines copper powder with other solid lubricants and anticorrosive agents in high-grade mineral oil. |
| • |
Prevents corrosion, stud damage and breakage and cold welding in addition to its lubricant action. |
|
| • |
As anti-seize thread compound on nuts, bolts, studs, gaskets and flanges on such metals as copper brass, cast iron, steel, all alloys, stainless-steel and plastics. |
| • |
As bearing lubricant in cement for Kiln shoe tyre, in ceramic for kiln car and trolley bearing etc. |
| |
|
| Temperature range: - |
| -10º C to +900º C |
|
|
Product |
Description / Characteristics |
Typical Application |
| |
MOLYGRAF-1000 |
Universal Anti-seize Compound
| • |
Universal assembly paste, formulated from selective solid lubricants and powders and proprietary additives for service over wide temperature range. |
| • |
Easy re-opening of fasteners etc even after prolonged use at the nearly same torque. |
| |
Useful where steam comes in contact or in corrosive environments. |
| • |
Good sealing. Prevents fretting corrosion. |
| • |
Easy re-opening means no breakage of studs, bolts. No damage to gaskets, flanges and seals. |
| • |
Excellent corrosion protection. Tenacious adhering film |
| • |
Assured protection of joints from seizure and cold welding. |
|
| • |
As antiseize thread compound for bolts, nuts, studs, valves etc in fertilizers, sugar, refineries, power plants, chemical plants and steam lines, cap screw, thread connections, gaskets, metal rings, thread connection in high temperature and in steam lines.. |
| |
|
| Temperature range: - |
| -10º C to +1200º C |
|
|
Product |
Description / Characteristics |
Typical Application |
| |
MOLYGRAF-NR |
Nickel Regular Anticorrosive Antiseize Compound
| • |
Based on Nickel, Copper, Graphite and other solid lubricants. |
| • |
Does not contain sulphur, chlorine etc. |
| • |
Is highly resistance to acidic and alkaline conditions. |
|
| • |
As antiseize thread compound where strong acidic fumes or steams are involved. |
| |
|
| Temperature range: - |
| -20º C to +1100º C |
|
|
Product |
Description / Characteristics |
Typical Application |
| |
MOLYGRAF-NS (SP) |
Nickel Special Anticorrosive Antiseize Compound
| • |
Based on Nickel, Copper, Graphite and other solid lubricants. |
| • |
Does not contain sulphur, chlorine etc. |
| • |
Is highly resistance to acidic and alkaline conditions. |
|
| • |
As antiseize thread compound where strong acidic fumes or steams are involved. |
| • |
Specifically for antiseize thread compound in Atomic power plants. |
| |
|
| Temperature range: - |
| - 40º C to + 1400º C |
|
|
Product |
Description / Characteristics |
Typical Application |
| |
MOLYGRAF-ZTL |
Zinc base Anti-seize Compound
| • |
High concentration paste of Zinc powder in highly refined mineral oil carrier for use as anti-seize thread compound. |
| • |
Contains anti-oxidant, film former, E. P. agents to enhance its performance and highly water and corrosion proof. |
| • |
Fine particle size of powder gives maximum coverage and it fills smallest cavities for optimum performance as anti-seize compound. |
|
| • |
Anti-seize thread compound in oil drill pipes and tool joint connections. |
| |
|
| Temperature range: - |
| -20º C to +400º C |
|
|
Product |
Description / Characteristics |
Typical Application |
| |
MOLYGRAF-TC-MOD |
High Concentration Metallic Powder base Anti-seize Compound
| • |
High concentration paste of metallic powders in highly refined mineral oil carrier for use as anti-seize thread compound for casings in oil drill Application |
| • |
Contains anti-oxidant, film former, E. P. agents to enhance its performance. |
| • |
Highly water and corrosion proof. |
|
| • |
Anti-seize thread compound for casings in oil drill application. |
| |
|
| Temperature range: - |
| - 20º C to +400º C |
|
|
Product |
Description / Characteristics |
Typical Application |
| |
MOLYGRAF-TC-60 |
Lead base Anti-seize Compound
| • |
High concentration paste of lead and other metallic powders in highly refined mineral oil for use in oil drill applications. |
| • |
Contains anti-oxidant, film former, E. P. agents to enhance its performance. |
| • |
Highly water and corrosion proof. |
| • |
The finely dispersed powder gives maximum coverage and fills smallest cavities for optimum performance as anti-seize compound. |
| • |
The product is most suitable for shock load or vibrations problem present in drilling operations. |
|
| • |
Anti-seize thread compound in oil drill pipes and tool joint connections. |
| |
|
| Temperature range: - |
| - 20º C to +400º C |
|
|
 |
|
|
